Proheat® 1600 STC™ Heat Gun

The World’s First Surface Temperature
Sensing and Control Heat Gun


Surface Temperature Sensing & Control Heat Gun

Unlike other LCD display type heat guns which display only the temperature at the nozzle, the Master Proheat STC is the first heat gun to sense, display and control actual SURFACE temperatures. It is now possible to display your work surface temperature, dial-in a target temperature and watch the displayed temperature increase as it approaches and reaches your target temperature.

Once your target temperature is reached, the Master Proheat STC will automatically regulate the heater to maintain the target temperature. The Proheat STC compensates for changes in the distance from the work surface by automatically adjusting the temperature output.

This revolutionary new heat gun technology gives you the special capability of knowing your surface or work piece temperature at all times to enable process control for many temperature sensitive surface applications!

  • Speed up the heating process – work the upper limits of the cure zone
  • Built-in surface temperature sensor & LCD display – Real time display of both target and surface temperatures
  • LTS™ Laser targeting system – Provides accurate field of view & operating range
  • Dial-in variable temperature and airflow controls
  • Proloc™ Supervisor locking feature – Prevents changing of temperature or airflow for repeatability
  • LED Progress indicators - Green, yellow & red LED lights indicate progress in heating process
  • STC™ Automatic Surface Temperature Control - Automatically regulates heater to maintain target surface temperature

Available Models

PH-1600 Master Proheat STC Surface Temperature Sensing and Control Heat Gun 120V
PH-1600K Master Proheat STC with Storage / Carrying Case
35542 Master Proheat STC Storage / Carrying Case
35337 Master Proheat STC Nozzle Guard



Surface Temperature Range: 90°F - 500°F (50°C - 260°C)
Class 2 laser product, Max Output < 1mV, Wavelength 650 nm
Variable Air Volume: 4-16 CFM Variable Air Velocity: 734-4000 FPM
Volts: 120 VAC / 60Hz, 11A Max. Output: 1300 Watts
Nozzle Opening Diameter: .88" (22.35mm) Outer Nozzle Diameter: 1.31" OD (33.27mm)
Element: Enclosed Ceramic Switch: Lockable, Momentary Contact
Motor: Permanent Magnet Cordset: 6 ft, 3 wire grounded, oil resistant neoprene
Dimensions (tool): 8.2" x 3.0" x 7.3" (L x W x H) Net Weight Tool: 1.6 Lbs. (794g)
Dimensions (single pack): 9.6" x 11.5" x 4.0" (L x W x H) Weight (single pack): 2 Lbs. 10oz.
Warranty: One Year Limited